Greenheck’s Vektor line of high-plume lab and fume exhaust systems has expanded with the addition of two new models. The Vektor-CH utilizes a high-velocity discharge nozzle that efficiently exhausts air above the roof. In combination with a centrifugal blower, the Vektor-CH achieves high pressures and flow rates commonly required by fume exhaust systems.
To meet the need for optimum efficiency and energy savings across building loads, Armstrong...
EMD Millipore has introduced the EZ-Fit filtration unit, a ready-to-use, disposable filtration...
Labconco’s WaterPro BT water purification system offers all-in-one versatility in a compact size for lab benchtops. It delivers ultra-pure Type I, 18.2 megohm-cm, at a typical rate of > 0.5 L/min at inlet water temperature of 25 C either manually, or volumetrically, directly from tap water. It also delivers reverse osmosis (RO)-purified Type III water stored in the integral 6-L tank.
Dudick’s Steri-Soft is a flexible 100% UV-stable resilient urethane flooring system in both a solid or sparse flake finish. Steri-Soft provides anti-fatigue flexibility and has superior noise reduction properties. Internal testing has shown there is a 25% noise decibel reduction with Steri-Soft over traditional hard epoxy broadcast floors and other similar hard surfaces.
Kemutec’s Mucon Iris Diaphragm Valve (IDV) is a suitable cleanroom pass-thru solution. The IDV provides an effective, hygienic and reliable way to seal around tubes and pipes passing through a wall. The glanding characteristics allow the IDV to gland around irregular-shaped objects and provide a dust and pressure seal.
Kanomax’s Gasmaster handheld gas monitor is suitable for indoor, industrial and outdoor air-quality monitoring. The unit is compatible with over 30 different interchangeable sensor heads; one monitor can be used to measure multiple gases and concentrations.
The Purelab Chorus from Elga is a range of modular lab water systems delivering a selection of dispense, storage and installation options. The applications include sophisticated research and testing applications, qualitative analyses, feeding ultrapure water systems, glassware washing and autoclaves.
LabStrong now manufactures a ventgard filter suitable for operation in Thermo Scientific Barnstead water purification system storage reservoirs. The product protects pure water during storage by preventing airborne impurities such as organic vapors, carbon dioxide, alkali and acid gases.
The iTrans 2 employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility and lower installation costs.
The Airgas Systems Guide for Laboratory Gases and Cryogenics for architects and engineers contains gas delivery system product specifications, designs and CAD files for designing and building the right solutions for labs. Details gas regulators, panels, change-over manifolds, cabinets, cylinder storage and restraint systems, generators and more.
Mott Corp. offers two ultrahigh-purity gas filters to its all 316LSS Defender Filter product line, specifically designed to meet the need to greater volumes of gas with superior filtration and pressure drop performance.
ELGA’s CENTRA offering is available in two families: the centralized distribution systems, which distribute pre-purified water, and the centralized purification and distribution systems, which first purifies and then distributes the purified water.
In regulated laboratories, instrument qualification is a requirement. It is becoming increasingly important for laboratory water system users in regulated industries worldwide to comply with guidelines such as the FDA’s Title 21 CFR Part 11, or similar requirements set by other global regulatory organizations.
This new product combines a fully functional widespread laboratory faucet with an independently operated eyewash.
The PURELAB flex from Elga combines ease of use with the accurate delivery of pure and ultra pure water from a single system.
The conference theme, The Lab of Tomorrow, Bringing the Future to Life Today, will bring industry experts from around the world to discuss the drivers for change and the future of the laboratory, the evolving need for more advanced automation and innovation, and worldwide trends and insights into the life sciences industry.
In the midst of a crisis, chemical eye burn victims will instinctively scramble to the sink for relief. The Speakman SEF-1850 was designed with those natural reflexes in mind by combining a single hole installation faucet with an independently operated eyewash to install into any laboratory sink.
The PURELAB flex from Elga combines ease of use with the accurate delivery of pure and ultrapure water from a single system. Features include: ap to ultrapure in one step; absolute water purity of up to 18.2 MΩ-cm; ergonomic handset shows your essential water purity information; real time TOC monitoring; and choice of water dispense options.
Aalborg Instruments offers its economical TP Peristaltic Pump line. TPV models are designed for liquids of low to high viscosity and can also accommodate fuels with the appropriate tubing. TPV Pump Systems ensure stable performance and accurate, repeatable liquid transfer applications.
The Dynacalibrator Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source.
The Bold Line CO2 Controller adds carbon dioxide to air or nitrogen, and can be fully integrated with proprietary Bold Line temperature controllers. The carbon dioxide controller mixes air or nitrogen and carbon dioxide and controls the gas concentration with digital accuracy.
Sartorius' arium pro ASTM Type1 water purification systems are designed for sophisticated users to meet all requirements for reagent-grade water needed both for critical applications and routine analyses. The arium pro series offers four different versions, designed for reliable and optimal analytical results, as well as ease of use.
Aquionics' new UV-Pearl is the world's first water disinfection system to use UV-C LED technology, allowing instant full intensity on start-up and mercury-free water treatment. The compact system can operate as a stand-alone unit or be easily integrated into OEM devices, ultrapure water generators, process water loops, medical sterilization equipment, and many other point-of-use applications.
The Sartorius technology group has extended its successful arium lab water family by three new product lines: the arium pro ultrapure water system, the arium advance pure water system, and the arium comfort combination system.
The MEDICA range of laboratory water purification systems for clinical analyzers deliver CLRW grade water (clinical laboratory reagent water) to clinical chemistry and immunodiagnostic analyzers.
The Milli-Q Advantage A10 water purification system, from Millipore, has been designed to deliver high quality ultrapure water adapted to every user's needs in today's laboratory environment.
Siemens' range of LaboStar ultrapure water systems are designed to effectively produce analytical grade water on demand, and their compact design maximizes valuable laboratory space.
- Page 1