Subscribe to HVAC/Enclosures

The Lead

Explosion-proof CAV Lab Fume Hood

June 2, 2015 1:49 pm | by HEMCO Corp. | Product Releases | Comments

HEMCO Corp.’s UniFlow LE Fume Hood 96-in is constructed to meet all explosion-proof specifications for classified locations. The intrinsically safe airflow alarm that continuously monitors the face velocity is explosion-proof with a hot wire sensor. The hood is constructed of chemical-resistant, non-conductive, flame-retardant, non-metallic composite resin materials.

Exhaust Fans Receive High Wind Certification

June 2, 2015 1:18 pm | by Greenheck | Product Releases | Comments

Greenheck’s Vektor-H and Vektor-HS lab exhaust fan systems have received Miami-Dade NOA...

Lab Fume Hood

April 8, 2015 4:00 pm | by Mott Manufacturing | Product Releases | Comments

Mott Manufacturing’s adaptable Optima fume hood allows for personalized ergonomics and changing...

Next-generation Filtered, Green Fume Hood

April 8, 2015 3:57 pm | by Labconco Corp. | Product Releases | Comments

Labconco has introduced the energy-efficient Protector Echo Filtered Fume Hood that operates...

View Sample

FREE Email Newsletter

Emergency Safety Shower Decontamination Booth

April 8, 2015 3:52 pm | by HEMCO Corp. | Product Releases | Comments

HEMCO Corp.’s emergency shower/decontamination booths are fully assembled and ready for installation to water supply and waste systems. The shower is molded in a one-piece seamless chemical-resistant fiberglass. It’s equipped with a pull rod-activated shower and push handle eye/face wash for immediately drenching of personnel who have been exposed to hazardous chemicals.

Ceiling-mounted Air Filtration Units

April 8, 2015 2:33 pm | by Air Science USA | Product Releases | Comments

Air Science USA’s Purair SKY ceiling-mounted filtration units are designed to protect lab personnel and the environment in areas where hazardous substances are handled. Central to the design of the Purair SKY series is the Air Science EFT Enhanced Filtration Technology, developed to ensure universal protection in the work environment over a wide range of applications within the industry.

HVAC Humidity/Temperature Transmitter for Duct Mounting

April 8, 2015 2:29 pm | by E+E Elektronik | Product Releases | Comments

E+E Elektronik’s EE150 humidity and temperature transmitter has been optimized for use in the HVAC and building technology sectors. The IP65/NEMA 4 enclosure provides optimal protection of the electronics and the capacitive E+E humidity sensor element guarantees long-term stable measurement results.


Floor-mounted, Walk-in Fume Hoods

April 3, 2015 10:20 am | by HEMCO Corporation | Product Releases | Comments

UniFlow FM fume hoods are designed for synthesis, distillation and other rack type operations where tall apparatus is used or equipment is rolled into the work area. Full 70-in viewing height for ease of access and unobstructed view of fume chamber. Chamber sizes include 48 in, 60 in, 72 in, 96 in and 120 in, and depths of 30 in, 36 in and 48 in.

Glove Box Controls Relative Humidity or Oxygen Levels

March 29, 2015 10:06 am | by Flow Sciences Inc | Product Releases | Comments

The Nitrogen Purge Series of glove boxes from Flow Sciences Inc. allow the user to purge relative humidity or oxygen Levels down to ~2%. These enclosures are capable of protecting the process by nearly eliminating moisture or oxygen with the flow of inert gas. Safety of operator and process is accomplished with HEPA filtration, a one-way check valve and the ability to connect to a house exhaust system.

Vented Chemical Storage Cabinets

March 29, 2015 9:40 am | by Air Science Inc | Product Releases | Comments

The Safestore Vented Chemical Storage Cabinets from Air Science are suitable for storage of noxious or odorous chemicals. These cabinets minimize health and environmental risks in handling chemical vapors and residues, VOCs and general lab functions. The Air Science Multiplex filtration system protects the safety of personnel during use, maintenance and decontamination.

Ductless Fume Hood

March 17, 2015 11:24 am | by Air Science Inc. | Product Releases | Comments

The Purair 5 Ductless Fume Hoods from Air Science USA feature a high level of operator protection where routine work is being carried out. The units exceed OSHA, ANSI and all relevant international standards. The ductless design eliminates installation costs and allows the unit to be positioned over a sink or benchtop apparatus.

Process Enclosures

March 17, 2015 9:29 am | by Flow Sciences Inc. | Product Releases | Comments

Flow Sciences' Process Enclosures are designed and customized to protect the process equipment and the personnel. The EVP Series provides safety from chemical vapors generated during processes such as flash chromatography, evaporation from rotary evaporators and other process equipment applications. The Process Enclosure Series was developed for vapors to be removed from the application and the lab.


Lab Planning Solutions Brochure

March 5, 2015 5:27 pm | by HEMCO Corporation | Product Releases | Comments

Brochure includes HEMCO’s complete line of lab fume hoods featuring exclusive unitized construction for superior strength. The brochure features the UniFlow SE Aire-Stream UL Classified Fume Hoods. The non-metallic superstructure is totally chemical resistant and flame retardant.

Cleanroom Workstation

February 13, 2015 3:13 pm | by Leatherwood Plastics | Product Releases | Comments

Leatherwood Plastics offers benches and workstations tailored to suit clean process and pharmaceutical manufacturing needs. The Megasonic Wafer Cleaning Bench is a manually operated, acid cleaning tool constructed of polypropylene and has a footprint of 60 in wide by 37 in deep by 93.5 in high. The bench has a portioned sloped, sump area separating process and QDR waste and their drains.

Ductless Fume Hoods

February 13, 2015 3:05 pm | by Air Science USA | Product Releases | Comments

Air Science USA’s Purair 20 ductless fume hood is designed to provide operator protection when using hazardous substances. A face velocity at 100 fpm ensures containment of fumes, and an alarm will alert the operator when the airflow falls to an unacceptable level. All mechanisms in the head section of the Purair 20 are on the clean side of the filter, preventing contamination.

Chemical-resistant Canopy Hoods

February 13, 2015 3:02 pm | by HEMCO | Product Releases | Comments

HEMCO canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam and odors when mounted over areas with water baths, hot plates or portable equipment. Canopies are available in wall, island and corner models. Canopy hoods are available in stainless steel or fiberglass.

Clean Bench and Workstation Models

February 13, 2015 2:59 pm | by Clean Rooms International | Product Releases | Comments

Clean Rooms International offers a comprehensive line of clean bench and workstation models incorporating either HEPA or ULPA air filtration systems. These units provide workspace environments for a variety of applications, such as isolating a manufacturing process or for conducting research.


Class II, Type C1 Biosafety Cabinet

February 13, 2015 2:55 pm | by Labconco Corp. | Product Releases | Comments

Labconco Corp. has introduced the Purifier Axiom biosafety cabinet that can function as a Type A2, which recirculates air back into the lab, and as a Type B2, which is ducted to the outside. Features include a convertible sash that’s programmable for either an 8- or 10-in sash opening height.

CAS-797 Compliant Modular Cleanroom

February 2, 2015 3:11 pm | by CleanAir Solutions Inc. | Product Releases | Comments

CleanAir Solutions Inc.'s CAS-797 Compliant Modular Cleanroom system is engineered to be modular, so when your needs expand, so does your cleanroom. Easy-to-clean features are ideal for USP applications for pharmaceutical compounding and medical device manufacturing, assembly and packaging applications. The flush interior wall system offers interchangeable panel inserts of ABS, polycarbonate, aluminum composite, acrylic and tempered glass.

Ductless Fume Hoods

January 14, 2015 4:11 pm | by HEMCO Corporation | Product Releases | Comments

HEMCO Corp.'s CleanAire II Ductless Hoods are designed to meet DH I requirements as defined by SEFA 9. These hoods features a built-in carbon filtration system to adsorb non-toxic fumes and odors. The hoods are equipped with an integral blower, vapor proof light, fan and light switches.

Fume Exhaust Fans

December 5, 2014 3:20 pm | Product Releases | Comments

Greenheck’s Vektor line of high-plume lab and fume exhaust systems has expanded with the addition of two new models. The Vektor-CH utilizes a high-velocity discharge nozzle that efficiently exhausts air above the roof. In combination with a centrifugal blower, the Vektor-CH achieves high pressures and flow rates commonly required by fume exhaust systems.

Design Envelope Pumps

December 5, 2014 3:15 pm | Product Releases | Comments

To meet the need for optimum efficiency and energy savings across building loads, Armstrong Fluid Technology has introduced its Design Envelope pumps available with single-phase motors. Suitable for light commercial, residential and industrial applications using single-phase power, the pumps allow designers, contractors, project managers and building owners to choose the best pumping solution for their specific needs.

Ductless Workstation

December 5, 2014 3:03 pm | Product Releases | Comments

HEMCO Corp.’s MicroFlow II is a suitable Class 1 ductless carbon-filtered workstation equipped with Activated Carbon filtration for fumes, odors and non-hazardous chemical vapors. The workstation is self-contained with an integral recessed worksurface to contain spills.

Ductless Fume Hood

October 8, 2014 1:11 pm | Product Releases | Comments

Mystaire Inc. has introduced its Aura Elite Ductless Fume Hood. The fume hood includes the latest in microprocessor-based controls, including constant monitoring of fume hood face velocity, gas phase filtration saturation, temperature and humidity monitoring, along with instantaneous filter to chemical application validation.

Lab Air Filtration System

October 8, 2014 1:06 pm | Product Releases | Comments

Erlab’s Halo is a lab-grade air filtration system that provides safe reduction of air change rates while simultaneously improving the air quality of a lab. The technology utilizes Erlab’s patented Neutrodine filtration technology, allowing users to keep air quality high, without wasting energy.

Ductless Filtration System

October 8, 2014 12:51 pm | Product Releases | Comments

Air Science USA’s Vent-Box ductless filtration system is designed to protect lab personnel from chemical vapors found inside of stand-alone chemical safety cabinets. The Vent-Box utilizes the Air Science Multiplex Filtration System.

Energy-efficient Fume Hood

October 8, 2014 11:54 am | Product Releases | Comments

Mott Manufacturing’s Observation2 fume hood provides next-generation aesthetics, ergonomics, energy conservation and safety. Large glass panels bring in natural light and views while giving supervisors the ability to see students or employees are working safely.

Miniature Airflow Transmitter for HVAC

October 8, 2014 11:50 am | Product Releases | Comments

E+E Elektronik’s EE671 transmitter measures air velocity up to 20 m/sec. The built-in VTQ flow sensing element, based on thin-film technology, works on the hot-film anemometer principle. The sensor design, made possible by the use of transfer molding technology, is particularly resistant to contamination.

Lab Casework/Fume Hood

August 8, 2014 11:15 am | Product Releases | Comments

Hamilton Scientific has introduced the Panorama steel lab casework and the Mistral fume hood. The Panorama universal steel cabinet is engineered using an innovative design process to produce high-quality steel casework that provides a variety of sizes and styles that are field convertible.

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.