Subscribe to Equipment

The Lead

Point-of-use Vacuum for Biocontainment Labs

June 6, 2014 2:18 pm | Product Releases | Comments

VACUUBRAND’s BVC Professional G is a safe, convenient fluid aspiration system that isolates cell and tissue culture aspiration from building vacuum systems.

Rubber Floor Covering

June 6, 2014 2:10 pm | Product Releases | Comments

nora systems Inc. has introduced norament xp, an ultra-durable floor covering for highly...

Ductless Enclosures

June 6, 2014 2:00 pm | Product Releases | Comments

Labconco’s Paramount ductless enclosures are self-contained workstations that don’t require...

Acid Storage Cabinet

June 6, 2014 1:56 pm | Product Releases | Comments

HEMCO Corp.’s Acid Storage Cabinet is specifically designed for the storage of corrosive...

View Sample

FREE Email Newsletter

Small Animal Treadmills

June 6, 2014 1:52 pm | Product Releases | Comments

Coulbourn Instruments has introduced a line of high-performance small animal treadmills. These units are suitable for forced exercise training and muscle fatigue studies in rodents in labs. The treadmills feature a high-performance, silent motor, even at high speeds, that reduces stress to subjects and provides smooth operation.

Ductless Fume Hood

June 6, 2014 1:48 pm | Product Releases | Comments

Purair 5 ductless fume hoods from Air Science USA feature a high level of operator protection where routine work is carried out. The units exceed OSHA, ANSI and all relevant international standards. The ductless design allows the unit to be positioned over a sink or benchtop apparatus.

Chemical Workstations

June 6, 2014 1:45 pm | Product Releases | Comments

AirClean Systems AC600 Series chemical workstations provide protection of the operator and lab environment from toxic vapors, gases, fumes and particulates when performing low-volume applications with known chemicals. Smaller and more flexible than AirClean’s ductless fume hoods, the workstations include the same advanced safety features and technology.


Stainless Steel Fume Hoods

June 3, 2014 2:46 pm | Product Releases | Comments

The newly redesigned Protector Stainless Steel Radioisotope hoods from Labconco feature fully sealed integral worksurfaces with coved interiors to facilitate decontamination. New to the design are two Cord-Keeper slots located on the left and right side of the air foil to allow the sash to close when electrical cords from equipment inside the hood are plugged into receptacles located on the corner posts.

Fluid control for lab processes

March 31, 2014 10:18 am | Product Releases | Comments

Fluid Metering’s newly released 2014 full-line catalog contains new products as well as expanded flow and configuration information. The catalog details standard products, operating principles, pump capacities, drive characteristics, materials of construction, typical applications and ordering information.

Manometer offers vacuum, pressure measurements

March 31, 2014 10:08 am | Product Releases | Comments

MKS has introduced the a-Baratron, an advanced high-performance, heated absolute capacitance manometer with higher tolerance to ambient temperature changes. The a-Baratron manometer is internally heated to 45, 80 or 100 C, and has a pushbutton zero that allows service intervals up to four times longer than earlier models.

Digital pen works with design software

March 31, 2014 9:50 am | Product Releases | Comments

Anoto and ChasmTech announced the SmartInk Redline—a digital pen drawing markup solution with Anoto Live PDF. Designed for utilities, architects and engineers who need timely access to as-built information, SmartInk Redline allows users to markup CAD drawings and automatically reads the Anoto Live PDF files as they are returned.

Wi-Fi connected temp/humidity logger

March 31, 2014 9:46 am | Product Releases | Comments

The TR-72wf contains an integrated Wi-Fi function that enables it to automatically upload recorded data from the logger to TandD’s free cloud-based WebStorage Service. The device has an AP mode which allows for direct log on and downloading of data by a smartphone or tablet.


Entry-level balance for academic labs

March 1, 2014 1:30 pm | Product Releases | Comments

The dependable, rugged-built weigh cell of the Practum balance ensures that even entry-level users will start weighing right and obtain professional, accurate results at all times. The easy-to-use menu guides the user intuitively through standard built-in applications, such as weighing, counting, peak hold to “lock in” the highest reading of a measurement series and weighing under unstable conditions.

Thermal imaging device attaches to cell phone

February 3, 2014 2:38 pm | Product Releases | Comments

FLIR ONE’s ability to detect and visualize heat, including minute differences in temperature, allow users to spot relative temperature differences at doors and windows to optimize energy efficiency, or to locate wall studs and ceiling joists.

BIM solution with enhanced workgroup function

January 6, 2014 1:48 pm | Product Releases | Comments

With the enhanced workgroup functionality, Allplan 2014 allows architects to integrate project partners and employees in their working environment across office and company boundaries as though all were working around the same table on the same design.

Economical anaerobic chamber

December 16, 2013 3:57 pm | Product Releases | Comments

Specifically designed for use by smaller labs, it may also serve as an economical setup for larger labs. Bactron systems have airtight construction of stainless steel and rigid Plexiglas, for unobstructed vision and integrity. The patented cuffs form a comfortable seal around the operator's arms permitting bare hand manipulation of plates and specimens inside the working chamber, making work more comfortable and efficient. 

Touchscreen peristaltic pump

November 18, 2013 3:49 pm | Product Releases | Comments

The Allegro peristaltic pump system allows maintenance-free, continuous flow pumping for various fluids. The Allegro can easily dispense in forward or reverse direction using the touchscreen display. Additionally, all parameters are clearly displayed on the touchscreen for easy viewing.


User-friendly lab balance

October 14, 2013 12:23 pm | Product Releases | Comments

Its intuitive operating design guides users through the many weighing applications built into the balance, helping to enhance lab workflows. The new Sartorius lab balance is available in a choice of 12 models with weighing capacities ranging from 120 to 5,100 g and readabilities extending from 0.1 mg to 1 g.

Compact Raman microscope

October 14, 2013 11:59 am | Product Releases | Comments

Ocean Optics has introduced the IDRaman micro, a compact microscope designed for Raman measurements in research, quality control and quality assurance environments. The IDRaman micro is a versatile, high-performance analytical tool for applications where sampling requires careful focus and high spatial resolution to optimize the Raman signal.

Ergonomic pipette

October 13, 2013 5:53 pm | Product Releases | Comments

Features include: a dual-volume setting system and volume lock, easy calibration, universal shaft, durable sealing system effective for 60,000 cycles, fully autoclavable, UV resistant, large pipetting pushbutton, color-coded, comfortable finger hook, contoured handle and soft spring system to minimize hand fatigue.

Benchtop spectrometer

September 27, 2013 4:26 pm | Product Releases | Comments

The benchtop model allows users to work with a flat-topped peak profile that tolerates mass-scale drift with no effect on measurement results. Additionally, the speed of measurement combined with precise analysis should enable a faster process understanding and, in turn, a shorter development cycle.

Stackable chilling incubators

September 27, 2013 9:55 am | Product Releases | Comments

Torrey Pines Scientific offers the EchoTherm stackable/programmable vibration-free chilling incubators for protein crystallography and other life science uses. The incubators are 27-L capacity and Peltier-based for heating and chilling.

Safety-enhanced gas burners

September 3, 2013 5:20 pm | Product Releases | Comments

The animated, self-explanatory and wordless symbol display facilitates a rapid and easy selection of all functions. To assist the user, the new functions provide: zero-pressure shut off, gas consumption display, cooling reminder for inoculation loops, temperature regulation for heating media, user account selection, graphical installation instructions and acoustic signals as operating aids.

Adjustable workstation also provides mobility

August 19, 2013 12:50 pm | Product Releases | Comments

Kewaunee Enterprise is a self-supporting, moveable workstation table design. It is available with an above counter support structure, or as an adjustable height four legged table.

Clean air enclosures handle samples in dust-free environment

July 1, 2013 12:28 pm | Product Releases | Comments

The new Captair Flow fume hoods from Erlab are designed to protect samples handled in the enclosure using very low energy consumption. Air entering the enclosure is free of any external contamination and provides an ultraclean work atmosphere which protects contamination-sensitive samples.

Laboratory hoods contain chemical fumes and vapors while conserving energy

July 1, 2013 12:24 pm | Product Releases | Comments

The Protector XStream laboratory hood from Labconco is a high-performance fume hood which operates well at low air volumes. The Protector XStream uses patented features that work together to significantly reduce the concentrations of contaminants in areas behind the sash opening and near the user's breathing zone.

Polypropylene total exhaust fume hoods

July 1, 2013 11:21 am | Product Releases | Comments

The AirMax fume hood with wet fume scrubber system from AirClean Systems is a complete solution for protecting personnel from dangerous chemical exposure while also protecting ductwork and the environment by scrubbing acids and other water soluble gases from fume hood exhaust.

White paper: lab equipment energy savings

June 4, 2013 9:15 am | White Papers

As the cost of energy continues to rise and research budgets grow ever tighter, a lab’s autoclave is an excellent place to create savings without compromising on usability or results. In a 2011 audit, researchers with the British Higher Education for Environmental Performance Improvement (HEEPI) project’s S-Lab initiative found that the University of Edinburgh’s Cancer Research Centre’s pair oflarge medical-grade autoclaves accounted for 41 percent of that facility’s total annual energy usage.

New high-tech chemistry lab for UC Berkeley

June 3, 2013 12:54 pm | News | Comments

The College of Chemistry at the University of California, Berkeley  is  redesigning and rebuilding its chemistry and chemical engineering laboratories with a $30 million, 22,000 sf project in a facility that had not been upgraded for nearly 50 years.

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.