Manufacturing

Featured Topics in Manufacturing: Optics | Engineering | Electrical | Processing | Consumer Electronics | all topics

Filter by: News | Articles | New to Market | Tools & Technology | Videos | Podcasts | Journal Articles | White Papers

Engineers develop novel system for producing conductive filmsEngineers develop novel system for producing conductive films

Yale University engineers have developed a novel automated system for generating strong, flexible, transparent coatings with promising uses in lithium-ion battery and fuel cell production, among other applications. The system, called spin-spray layer-by-layer, cuts process time and produces films with both nanolevel precision and improved function.

Prototype bioreactor evaluates engineered tissue while creating it

Prototype bioreactor evaluates engineered tissue while creating it

Researchers at NIST have developed a prototype bioreactor that both stimulates and evaluates tissue as it grows, mimicking natural processes while eliminating the need to stop periodically to cut up samples for analysis. Tissue created this way might someday be used to replace, for example, damaged or diseased cartilage in the knee and hip.

Superradiant laser offers substantial stability improvement

Superradiant laser offers substantial stability improvement

An ordinary laser relies on millions of particles of light (photons) ricocheting back and forth between two mirrors. This doesn’t happen in a new JILA laser that relies on a million rubidium atoms working in synchrony to boost photon emissions rates by a factor of 10,000. With such technology, even a highly stable, low-power laser can be superradiant.

Chinese solar makers reject US dumping ruling

Chinese producers of solar power equipment on Friday rejected an American anti-dumping ruling in a case that threatens to worsen U.S.-Chinese tensions. They warned proposed punitive tariffs might hurt efforts to promote clean energy.The United States and China have pledged to cooperate in...

For Chicago, NATO summit brings commuter headaches

As President Barack Obama and 50 heads of state arrive for a NATO summit, parts of Chicago are all but shutting down — the result of dire warnings about heightened security, snarled transportation and the threat of large protests downtown.For weeks, the extensive preparations have been hard to...

Chevrolet to debut rear-wheel-drive SS next year

For the first time in nearly two decades, the Chevrolet brand will have a rear-wheel-drive sedan in its U.S. lineup.General Motors Co. said Thursday that the 2014 Chevrolet SS will go on sale in limited numbers late next year. The V-8-powered SS will be closely related to GM's Holden VF...

Earnings Preview: Campbell Soup to report 3Q

Campbell Soup Co. reports its third-quarter results Monday, which should give investors a glimpse into how the company's decision to scale back on discounting amid a turnaround effort is affecting revenue.WHAT TO WATCH FOR: The Camden, N.J.-based company, which is known for its red and white...

Skechers settles with WA over false advertising

Washington state residents who bought a Skechers USA Inc. shoe that promised toned buttocks will be able to get a refund.Attorney General Rob McKenna's office says the shoe company will allocate $40 million for refunds and pay $5 million to the 44 states that sued the shoemaker for false...

Vermont to get $70,000 in Skechers settlement

Vermont's attorney general says Vermont will share in a settlement with footwear company Skechers USA Inc. over unsubstantiated health claims about its shoes.Skechers will pay $40 million to settle charges by the Federal Trade Commission that the company made unfounded claims that its Shape-ups...

Computing experts unveil superefficient “inexact” chip

Computing experts unveil superefficient “inexact” chip

In a recent project that has challenged the notion that the best chip is the most accurate one, a research team has unveiled this week its prototype “inexact” computer chip. By allowing the chip to make a few mistakes, developers were able to slash the power consumption of the chip dramatically. The result is a chip at least 15 times more efficient than today’s technology.

U.S. leads drug-approval race

The U.S. Food and Drug Administration (FDA) generally approves drug therapies faster and earlier than its counterparts in Canada and Europe, according to a new study by Yale University School of Medicine researchers. The study counters perceptions that the drug approval process in the U.S. is especially slow.

Paralyzed woman uses her mind to control robot arm

Paralyzed woman uses her mind to control robot arm

Not long after a partially paralyzed man in Switzerland used his mind to remotely control a small robot, a Massachusetts woman paralyzed for 15 years used only her thoughts to direct a robotic arm to pick up a bottle of coffee and bring it to her lips But will the experimental brain-controlled technology ever help paralyzed people in everyday life?

Researcher achieves voltage control in plastic transistor

A year after a researcher at Linköping University in Sweden built a fully functional field-effect transistor from plastic, another scientist at the same institution has shown that it is possible to control these transistors with great precision, allowing the device to function as a logic circuit.

Blogs
in Manufacturing

more

Wanted: 2011's Top Technologies

Wanted: 2011's Top Technologies

The editors of R&D Magazine have opened the nominations for the 2012 R&D 100 Awards competition, which will celebrate the 50th anniversary of the awards. If your organization introduced a new product this year, or is planning to, you can begin the entry process now.

Hello and welcome to the new R&D Daily

Hello and welcome to the new R&D Daily

There’s nothing wrong with your watch. This is the same R&D Daily you received every afternoon. But after nearly three-and-half years and more than 5,000 stories, the R&D Daily is undergoing a mitosis of sorts, evolving to a.m. and p.m. editions. You will get the same high-technology content as before, just more of it, in a more timely manner.

Multimedia
in Manufacturing

more

FeatureCAM Customer Testimonial Oakes Manufacturing

Based in Fort Collins, USA, Oakes Manufacturing uses FeatureCAM to manufacture piece parts for OEMs, prototype parts for research centres and universities, and even dental products for horse dentists! Find out how FeatureCAM has helped Oakes Manufacturing significantly decrease their...

Manufacturing Technology Transporter MANTRA Road Show

An engineering and manufacturing road show on wheels has begun touring the UK to bring the latest and future technologies to businesses and schools. MANTRA (The Manufacturing Technology Transporter) is a specially modified HGV packed with the latest machinery and simulators. The 14 metre...

New To Market
in Manufacturing

more

JEOL to launch world's smallest solid-state NMR probe

According to JEOL Resonance, a new benchmark for resolution and benchmark will be set with its introduction next week of a new 0.75-mm solid state nuclear magnetic resonance (NMR) probe. The probe is capable of high resolution sample analysis by spinning the sample at 110 kHz, the world's fastest spinning speed for NMR.

AFM provides unprecedented accuracy

Park Systems’ new NX10 atomic force microscope (AFM) is a research-grade true non-contact AFM, featuring Z-servo speed, XYZ scanner linearity, closed-loop detector noise, and minimized thermal drift.

Tools & Technology
in Manufacturing

more

Additive Manufacturing System

Renishaw Inc.'s laser melting additive-metal manufacturing process is capable of producing fully dense metal parts direct from 3D CAD data using a high-powered fiber laser.

Leak Testing System Shortens Cycle Time

InterTech Development Company has designed an in-line solution around the versatility of their M1075 leak tester. The new system shortens test cycle time and saves costs for diesel engine production lines by finding leaks faster.

Advertisement

Advertisement

Top Stories and Headlines
EVERY DAY!

FREE Email Newsletter