Product Releases
Subscribe to Lab Design News Product Releases

The Lead

Water purification system

March 31, 2014 | Comments

The Purelab Chorus from Elga is a range of modular lab water systems delivering a selection of dispense, storage and installation options. The applications include sophisticated research and testing applications, qualitative analyses, feeding ultrapure water systems, glassware washing and autoclaves.


Point-of-use Vacuum for Biocontainment Labs

June 6, 2014 2:18 pm | Comments

VACUUBRAND’s BVC Professional G is a safe, convenient fluid aspiration system that isolates cell and tissue culture aspiration from building vacuum systems.


Lab Monitor

June 6, 2014 2:14 pm | Comments

Phoenix Controls’ View is a local interface monitor for critical environments in healthcare and life science facilities. The sleek design is inspired by today’s tablets and tile-based user interfaces, which make View visually appealing and familiar.


Rubber Floor Covering

June 6, 2014 2:10 pm | Comments

nora systems Inc. has introduced norament xp, an ultra-durable floor covering for highly impacted and trafficked workspaces. Offering enhanced stain and slip resistance, norament xp is a suitable choice for cGMP facilities. In addition to extreme impact and stain resistance, norament xp offers easy maintenance and reparability for a consistent, clean look.


Table System

June 6, 2014 2:04 pm | Comments

Mott Manufacturing has introduced the Altus Table System. Altus is highly adaptable for changing labs; workstations can be integrated into existing workspaces or located as freestanding, self-supporting moveable workstations. The ergonomic design allows users to quickly adjust the table frame in 1-in increments from 29 in to 36 in to adapt to new tasks, equipment and users.


Ductless Enclosures

June 6, 2014 2:00 pm | Comments

Labconco’s Paramount ductless enclosures are self-contained workstations that don’t require ducting, making them suitable for modular labs where applications or personnel change. The enclosures are suitable in a lab setting where everything from dealing with noxious fumes to fingerprint powders are used.


Acid Storage Cabinet

June 6, 2014 1:56 pm | Comments

HEMCO Corp.’s Acid Storage Cabinet is specifically designed for the storage of corrosive chemicals and is available in 12-, 18-, 24-, 30-, 36-, 42- and 48-in widths. Standard size is 35-in high and 22-in deep.


Small Animal Treadmills

June 6, 2014 1:52 pm | Comments

Coulbourn Instruments has introduced a line of high-performance small animal treadmills. These units are suitable for forced exercise training and muscle fatigue studies in rodents in labs. The treadmills feature a high-performance, silent motor, even at high speeds, that reduces stress to subjects and provides smooth operation.


Ductless Fume Hood

June 6, 2014 1:48 pm | Comments

Purair 5 ductless fume hoods from Air Science USA feature a high level of operator protection where routine work is carried out. The units exceed OSHA, ANSI and all relevant international standards. The ductless design allows the unit to be positioned over a sink or benchtop apparatus.


Chemical Workstations

June 6, 2014 1:45 pm | Comments

AirClean Systems AC600 Series chemical workstations provide protection of the operator and lab environment from toxic vapors, gases, fumes and particulates when performing low-volume applications with known chemicals. Smaller and more flexible than AirClean’s ductless fume hoods, the workstations include the same advanced safety features and technology.


Stainless Steel Fume Hoods

June 3, 2014 2:46 pm | Comments

The newly redesigned Protector Stainless Steel Radioisotope hoods from Labconco feature fully sealed integral worksurfaces with coved interiors to facilitate decontamination. New to the design are two Cord-Keeper slots located on the left and right side of the air foil to allow the sash to close when electrical cords from equipment inside the hood are plugged into receptacles located on the corner posts.


Flexible film isolator

March 31, 2014 10:22 am | Comments

The Purair Flex Film Isolator features a curved film design that provides more working volume in the glove bag. The double O-ring design on the standard polyurethane cuffs allow users to quickly and easily change gloves to meet a variety of dexterity needs.


Fluid control for lab processes

March 31, 2014 10:18 am | Comments

Fluid Metering’s newly released 2014 full-line catalog contains new products as well as expanded flow and configuration information. The catalog details standard products, operating principles, pump capacities, drive characteristics, materials of construction, typical applications and ordering information.


Operator protection from gas and particulates

March 31, 2014 10:13 am | Comments

The Mystaire FE-2620 ductless economy chemical workstation provides operator protection while performing routine lab manipulations with liquid chemicals or powders. The ductless economy chemical workstation can easily be positioned over a lab sink, or placed directly on a counter or benchtop.


Manometer offers vacuum, pressure measurements

March 31, 2014 10:08 am | Comments

MKS has introduced the a-Baratron, an advanced high-performance, heated absolute capacitance manometer with higher tolerance to ambient temperature changes. The a-Baratron manometer is internally heated to 45, 80 or 100 C, and has a pushbutton zero that allows service intervals up to four times longer than earlier models.


Monostack fume exhaust fan

March 31, 2014 10:01 am | Comments

Strobic Air offers a monostack fume exhaust fan with wheel sizes from 18 to 36 in. Airflow capacities go to 24,000 cfm with no belts or couplings. The direct drive, low premium efficient VFD duty motors have spark-resistant construction. The efficient nozzle design has high velocity plume dispersion.



You may login with either your assigned username or your e-mail address.
The password field is case sensitive.